Specification
- Specifically formulated EPDM compound
- IDs of 5” or larger moulded with integrated ribs
- Can be custom formulated to meet specified end use application
- Custom-cut lengths available
- Vacuum collapse rating exceeds 54.4 inH20
- Recommended service temperatures: -40°F to +250°F (-40°C to 121°C)
- Complies with physical and mechanical property requirements per ASTM D2000 3BA715A14B13C12F17
- Hardness Durometer, ASTM D2240, Type A, 70±5 Shore A Hardness Points
- Tensile Strength, ASTM D412, Die C, 1500 psi., minimum
- Ultimate Elongation, ASTM D412, Die C, 250%, minimum
- Air Age Testing, ASTM D573, 70 hrs. at 100°C (212°F)
- Hardness Durometer Change, +10, maximum
- Tensile Strength Change, -25%, maximum
- Ultimate Elongation Change, -25%, maximum
- Compression Set Testing, ASTM D395, Method B, 22 hrs. at 70°C (158°F), 25% maximum
- Ozone Resistance Testing, ASTM D1171, Method A, Exposure Rating, 72 hrs. at 40°C (104°F), 50 pphm, No Cracks Low Temperature Resistance Testing, ASTM D2137, Method C. Non Brittle after 3 Minutes at -40°C (104°F).
Range
Dimensions in Inches
| Part No. | ID | L | OD | T |
| S200X250 | 2.00 | 2.50 | 2.50 | 0.19 |
| S300X300 | 3.00 | 3.00 | 3.38 | 0.19 |
| S400X350 | 4.00 | 3.50 | 4.50 | 0.25 |
| S500X350 | 5.00 | 3.50 | 5.50 | 025 |
| S550X400 | 5.50 | 4.00 | 6.00 | 0.25 |
| S600X350 | 6.00 | 3.50 | 6.50 | 0.25 |
| S700X350 | 7.00 | 3.50 | 7.50 | 0.25 |
| S800X350 | 8.00 | 3.50 | 8.50 | 0.25 |
| S900X350 | 9.00 | 3.50 | 9.50 | 0.25 |